Visit
Apply
Give

Mechanical, Industrial and Manufacturing Engineering

Presentations and publications

Books and Book Chapters

  • Standard Handbook of Machine Design, Editors, Joseph E. Shigley and Charles R. Mischke, Chapter 28, "Journal Bearing Design," pp. 28.1 to 28.57, published by McGraw-Hill Book Company, 1986.
  • Bearings & Lubrication: Mechanical Designer's Workbook, Editors, Joseph E. Shigley and Charles R. Mischke, Chapter 4,"Journal Bearing," pp. 116-194, published by McGraw-Hill Book Company, 1990.
  • Materials in Space-Science, Technology and Exploration , Co-Editors: A.F. Hepp, J.M. Prahl, S.G. Bailey and J.R. Fowler, Vol 551, Materials Research Society, Symposium Proceedings, 1999
  • Gas Dynamics, 3rd Ed. Co-Author: J. E. A. John, 2006, Prentice-Hall
  • Handbook of Lubrication and Tribology Volume II Theory and Design, 2nd Edition, Edited by Robert W. Bruce, Chapter 46, “Hydrodynamic Step and Wedge Bearings,” pp.46-1 to 46-24, Co-Authors: S. Cioc and L. Moraru, published by CRC Press, Taylor & Francis Group, 2012

 

Presentations and Invited Seminars

  1. "Finite Difference Solutions of Laminar Flow through a Pipe Orifice," presented at the Chemical Engineering Seminar, University of Toledo, November 1971.
  2. "Total Pressure Recovery of Flared Fan Nozzles Used as Inlets," presented to the Department of Mechanical Engineering, Cleveland State University, May 1978.
  3. "Wind Power/Energy Potential," presented at UT Faculty/Research Exchange, February 1980.
  4. Invited M. E. Dept. Speaker, LSU Baton Rouge, LA - "Numerical Simulation of Complex Fluid Flows," January 1983.
  5. Invited M. E. Dept. Speaker, Michigan State University, East Lansing, "Electrothermal Deicing of Helicopter Blades," February 8, 1983.
  6. Invited speaker at the OSPE Professional Engineers in Industry, Toledo, April 1983.
  7. Panelist on Merit and Academic Rank Criteria at the Joint Conference of Ohio Engineering Deans and Department Chairmen, Wright-Patterson AFB, Ohio, April 1983,
  8. Invited Panelist on "Cavitation Fundamentals" at STLE Annual Meeting, Cleveland, Ohio, "The Numerical Modeling of Cavitation in Fluid Film Bearings,” May 1988,
  9. Sigma Xi/ Dion D. Raftopolous Outstanding Research Award Address, "Numerical Modeling: Past, Present, and Future," March 1990,
  10. Invited speaker in the M.E. Dept. of the University of Petroleum Beijing, Beijing, China, January 1991.
  11. Invited speaker at the Shanghai Institute of Mechanical Engineering, Shanghai, China, February 1991.
  12. Invited speaker to the M.E. Dept. at the U. of Akron, Akron, Ohio, May 1993.
  13. “How to Design and Deliver Technical Presentations,” 3 hr workshop to NASA/OAI Interns, July 1997
  14. “How to Design and Deliver Technical Presentations,” 2 hr seminar to EE students at CaseWestern Reserve University, April 1998.
  15. “The ULTRA Consortium,” 1 hr. presentation at the Society of Tribologists and Lubrication Engineers, Cleveland Section Meeting, October 14, 1998
  16. “How to Design and Deliver Technical Presentations,” 2 hr workshop to NASA/OAI Summer Interns, July 1998
  17. “How to Design and Deliver Technical Presentations,” 2 hr workshop to NASA/OAI Summer Interns, July 1999
  18. “How to Design and Deliver Technical Presentations,” 2 hr workshop to NASA/OAI Summer Interns, July 2000
  19. “Gas Dynamics Through the use of Spreadsheet Programming,” presented to faculty and students at Embry-Riddle Aeronautical University, October 30, 2003
  20. “Historical Perspectives in Gas Dynamics,” The Ohio State University, 2006
  21. “Historical Perspectives in Gas Dynamics,” Memphis State University, 2006
  22. “Historical Perspectives in Gas Dynamics,” University of Akron, 2006
  23. “Success” Keynote Speaker at the University of Toledo, College of Engineering, Honors Convocation, November 17, 2006
  24. “Historical Perspectives in Gas Dynamics,” Western Michigan, February 27, 2008
  25. “Wind: The Largest Renewable Energy Source,” presentation at a convocation on Alternative Energy at the University of Toledo, June 4, 2008
  26. “Effective Mentoring of Graduate Students,” to the faculty and staff of the Electrical and Computer Science Engineering Department, at the University of Toledo, September 12, 2008
  27. “Historical Perspectives in Gas Dynamics,” Cleveland State University, Engineering Alumni Speaker Series, November 15, 2011
  28. “Two Historical Vignettes from Heat Transfer,” University of Toledo, Engineering Mechanical Engineering Speaker Series, February 24, 2012
  29. “Historical Perspectives and Personalities in Compressible Fluid Flow,” AIAA Distinguished Lecturer Series, the Ohio Aerospace Institute, (OAI), June 12, 2014
  30. “Two Historical Vignettes from the Field of Thermal Physics,”   University Programs at the NASA Glenn Research Center, Cleveland, Ohio July 16, 2014.

Journal Papers

  1. "Calculation of Real-Gas Effects in the Depressurization of Air Storage Cylinders" (co-author, J. E. A. John), AIAA Journal of Spacecraft and Rockets, Vol. 7, No. 7, July 1970, pp. 890-894
  2. "Subsonic Flow into a Downstream Facing Inlet," AIAA Journal of Aircraft, Vol. 11, No. 4, 1974, pp. 251-252
  3. "Numerical Determination of Orifice Coefficients," (co-author, J. E. A. John), ASME Journal of Fluid Mechanics, Vol. 99, No. 2, June 1977, pp. 424-425
  4. "Graphical Solution of Unsteady Viscous Flow Problems," (co-author, W. S. Janna), International Journal of Mechanical Engineering Education, Vol. 5, No. 2, 1977, pp. 97-105
  5. "Total Pressure Recovery of Flared Fan Nozzles Used as Inlets," (co-authors:  T. N. Obee and D. A. Dietrich), AIAA Journal of Aircraft, Vol. 16, No. 2, February 1979, pp. 110-115
  6. "Numerical Simulation of a Stirling Engine Oil Pumping Ring Seal," (co-author, P. J. Smith) Simulation, August 1980, pp. 49-60
  7. "Thermoelastohydrodynamic Analysis of an Oil Pumping Ring Seal," (co-author, P. J. Smith), Israel Journal of Technology, Vol. 20, 1982, pp. 49-59
  8. "Investigation of the Effects of Initial Fluid Film Profile on Pumping Ring Operation," (co-author, P. J. Smith), ASME Journal of Lubrication Technology, Vol. 105, No. 10, 1983, pp. 609-614.
  9. "Assessment of Two Neglected Effects in the Analysis of an Oil Pumping Ring Seal," (co-author, P. J. Smith), ASMEJournal of Tribology, Vol. 106, No. 1, 1984, pp. 128-133
  10. "Operating Aspects of an Oil Pumping Ring Seal," (co-author, P. J. Smith), ASME Journal of Tribology, Vol. 108, April 1986, pp. 275-281
  11. "A Vortex Lifting Line Method for the Analysis of Horizontal Axis Wind Turbines," (co-author, A. A. Afjeh) ASME Journal of Solar Energy Engineering, Vol. 108, No. 4, 1986, pp. 303-309
  12. "A Simplified Free Wake Method for Horizontal Axis Wind Turbine Performance Prediction," (co-author, A. A. Afjeh), ASME Journal of Fluids Engineering, Vol. 108, No. 4, 1986, pp. 400-406
  13. "Numerical Prediction of Cold Turbulent Flow in Combustor Configurations with Different Center Body Flame Holders," (co-authors: C. N. Yung and K. J. De Witt) Chemical Engineering Communications, Vol. 65, 1988, pp. 61-78
  14. "Numerical Prediction of Cavitation in Noncircular Journal Bearings," (co-author, K. Vaidyanathan), STLE Tribology Transactions, Vol. 32, No. 2, 1989, pp. 215-224
  15. "Development and Evaluation of a Cavitation Algorithm," (co-author, D. Vijayaraghavan), STLE Tribology Transactions, Vol. 32, No. 2, 1989, pp. 225-233
  16. "Efficient Numerical Simulation of a One-Dimensional Electrothermal Deicer Pad," (co-authors: R. J. Roelke, K. J. De Witt and W. B. Wright), AIAA Journal of Aircraft, Vol. 25, No. 12, December 1988, pp. 1097-1105
  17. "Two-Dimensional Simulation of the Electrothermal Deicing of Aircraft Components," (co-authors: W. B. Wright and K. J. De Witt) AIAA Journal of Aircraft, Vol. 26, June 1989, pp. 554-562
  18. "Numerical Simulation of Axisymmetric Turbulent Flow in Combustors and Diffusers," (co-authors: C. N. Yung and K. J. De Witt) International Journal for Numerical Methods in Fluids, Vol. 9, 1989, pp. 167-183
  19. "Langmuir Probe Measurements of an Arcjet Exhaust," (co-author, L. M. Carney) AIAA Journal of Propulsion and Power, Vol. 5, May-June 1989, pp. 287-294
  20. "The Effect of Ambient Pressure on the Performance of a Resistojet," (co-authors: D. H. Manzella, K. J. De Witt and P. F. Penko) AIAA Journal of Propulsion and Power, Vol. 5, 1989, pp. 452-456
  21. "A Simple Computational Method for Performance Prediction of Tip-Controlled Horizontal Axis Wind Turbines," (co-author, A. A. Afjeh) Journal of Wind Engineering and Industrial Aerodynamics, Vol. 32, 1989, pp. 231-245
  22. "Effect of Cavitation on the Performance of a Grooved Misaligned Journal Bearing," (co-author D. Vijayaraghavan) Wear, Vol. 134, 1989, pp. 377-397.
  23. "Predicted Aerodynamic Performance of a Horizontal Axis Wind Turbine Equipped with Vortex Generators," (co-authors: A. A. Afjeh and A. Fateh) Journal of Wind Engineering and Industrial Aerodynamics, Vol. 33, 1990, pp. 515-529
  24. "An Efficient, Robust and Time Accurate Numerical Scheme Applied to a Cavitation Algorithm," (co-author D. Vijayaraghavan) ASMEJournal of Tribology Vol. 112, January 1990, pp. 44-51.
  25. "Grid Transformation and Adaptation Techniques Applied in the Analysis of Cavitated Journal Bearing," (co-author D. Vijayaraghavan), ASME Journal of Tribology, Vol. 112, January 1990, pp. 52-59.
  26. "Analysis of a Finite Misaligned Journal Bearing Considering Cavitation and Starvation Effects," (co-author D. Vijayaraghavan), ASME Journal of Tribology, Vol. 112, January 1990, pp. 60-67.
  27. "Thermal Analysis of Engine Inlet Anti-Icing Systems," (co-authors: K. M. Al-Khalil, K. J. De Witt, J. K. Nathman and D. A. Dietrich) AIAA Journal of Propulsion and Power, Vol. 6, No. 5, September-October 1990, pp. 628-634.
  28. "An LDA Investigation of Three-Dimensional Normal Shock Wave Boundary Layer Interactions," (co-authors: R. M. Chriss, W. R. Hingst and A. J. Strazisar) La Recherche Aerospatial  (in French and English) No. 1900-2, 1990, pp. 1-15.
  29. "Three-Dimensional Steady Flow Through a Bifurcation," (co-authors: C. N. Yung and K. J. De Witt) ASME Journal of Biomechanical Engineering Vol. 112, No. 2, May 1990, pp. 189-197.
  30. "Test-Cell Pressure Effects on the Performance of Resistojets," (co-authors: D. H. Manzella, P. F. Penko and K. J. De Witt) AIAA Journal of Propulsion and Power, Vol. 7, No. 2, March-April 1991, pp. 269-274.
  31. "Performance Characteristics of Cavitated Noncircular Journal Bearings in the Turbulent Flow Regime," (co-author, K. Vaidyanathan), STLE Tribology Transactions, Vol. 34, 1, 1991, pp. 35-44.
  32. "Extension of Transonic Flow Computational Concepts in the Analysis of Cavitated Bearings," (co-authors: D. Vijayaraghavan and D.E. Brewe) ASME Journal of Tribology, Vol.113, 3, July 1991, pp.539-546.
  33. "Hydrodynamic and Thermal Analysis of Rivulet Flow Down a Vertical Solid Wall," (co-authors: K. M. Al-Khalil and K. J. De Witt), International Journal of Numerical Methods for Heat and Fluid Flow, Vol. 1,1, September 1991, pp 63-76.
  34. "Cascade Flutter Analysis with Transient Response Aerodynamics," (co-authors: M. A. Bakhle, A.J. Mahajan and G.L. Stefko) Computers and Structures, Vol. 41,5, 1991, pp.1073-1085.
  35. "Numerical Simulation of Rarefied Gas Flow Through a Slit," (co-authors: C. H. Chung, K. J. De Witt, and D. R. Jeng) AIAA Journal of Thermophysics and Heat Transfer, Vol. 6,1, January-March, 1992, pp 27-34.
  36. "Time Domain Flutter Analysis of Cascades Using a Full-Potential Solver," (co-authors: M. A. Bakhle and T. S. Reddy) AIAA Journal, Vol. 30,1, January 1992, pp. 163-170.
  37. "An Investigation of the Diffuser Flow Quality in an Icing Research Tunnel," (co-author: H. E. Addy) AIAA Journal of Aircraft, Vol. 29, 1, January-February, 1992, pp. 47-51.
  38. "Effect of Type and Location of Oil Groove on the Performance of Journal Bearings," (co-author D. Vijayaraghavan), STLE Tribology Transactions, Vol. 35, 1, 1992 pp. 98-106.
  39. "Applications of an Exponential Finite-Difference Technique" (co-author: R.F. Handschuh) Numerical Heat Transfer Part A, Vol. 22, 1992, pp. 363-378.
  40. "Numerical Modeling of an Advanced Pneumatic Impulse Ice Protection System for Aircraft," (co-authors: S. Ramamurthy, K.J. De Witt, J.C. Putt, C.A. Martin and K.L. Leffel) AIAA Journal of Aircraft, Vol. 29, No. 6, November-December, 1992, pp. 1057-1063.
  41. "Three-Dimensional Numerical Simulation of Electrothermal Deicing Systems," (co-authors: A. D. Yaslik, K. J. De Witt and W. Boronow) AIAA Journal of Aircraft, Vol. 29, 6, November-December, 1992, pp. 1035-1042.
  42. "Modeling of Surface Water Behavior on Ice Protected Aircraft Components," (co-authors: K. M. Al-Khalil and K. J. De Witt), International Journal of Numerical Methods for Heat and Fluid Flow, Vol. 2, 6, December 1992, pp 555-571.
  43. "Effect of Out-of-Roundness on the Performance of a Diesel Engine Connecting-Rod Bearing," (co-authors: D. Vijayaraghavan and D. E. Brewe), ASME Journal of Tribology, Vol. 115, 3, July, 1993, pp. 538-543.
  44. "Subsonic/Transonic Cascade Flutter using a Full-Potential Solver," (co-authors: M. A. Bakhle and T. S. Reddy) AIAA Journal, Vol. 31, 7, July 1993, pp. 1347-1349.
  45. "Efficient Finite Element Method for Aircraft Deicing Problems," (co-authors: J. R. Huang and K. J. De Witt) AIAA Journal of Aircraft, Vol. 30, 3, September-October, 1993, pp 695-704.
  46. "New Concept in Runback Water Modeling for Anti-Iced Aircraft Surfaces," (co-authors: K. M. Al-Khalil and K.  J. De Witt) AIAA Journal of Aircraft, Vol. 30, No. 1, January-February 1993, pp. 41-49.
  47. "Development of an Improved Model for Runback Water on Aircraft Surfaces," (co-authors: K. M. Al-Khalil and K. J. De Witt) AIAA Journal of Aircraft, Vol. 31, No. 1, January-February 1994, pp. 271-278
  48. "A Boundary Element Cavitation Algorithm," (co-author Q. Yu) STLE Tribology Transactions, Vol. 37, 2, 1994, pp. 217-226.
  49. "An Elastohydrodynamic Cavitation Algorithm for Piston Ring Lubrication," (co-author Q. Yang), STLE Tribology Transactions, Vol. 38, 1, 1995 pp. 97-107.
  50. "Effect of Curvature in the Numerical Simulation of an Electrothermal De-Icer Pad," (co-authors: J. R. Huang and K. J. De Witt) AIAA Journal of Aircraft, Vol. 32, 1, January-February 1995, pp. 84-92.
  51. "Numerical Analysis of Rarefied Gas Flow Through Two-Dimensional Nozzles" (co-authors: C. H. Chung, K. J. De Witt, and D. R. Jeng) AIAA Journal of Propulsionand Power, Vol. 11, No. 1, January-February 1995, pp. 71-78.
  52. "Prediction of Cavitation in Journal Bearings Using a Boundary Element Method," (co-author Q. Yu), ASME Journal of Tribology, Vol. 117, 3, July, 1995, pp. 411-421.
  53. "Two-Dimensional Piston Ring Lubrication Part I: Rigid Ring and Liner Solution," (co-author Q. Yang), STLE Tribology Transactions, Vol. 39, 4, 1996 pp. 757-768.
  54. "Effect of Lubricant Supply Starvation on the Thermohydrodynamic Performance of a Journal Bearing," (co-authors D. Vijayaraghavan and D. E. Brewe), STLE Tribology Transactions, Vol. 39, 4, 1996 pp. 645-653
  55. "Two-Dimensional Piston Ring Lubrication Part II: Elastic Ring and Liner Solution," (co-author Q. Yang), STLE Tribology Transactions, Vol. 39, 4, 1996 pp. 870-880.
  56. "Three-Dimensional Pulsatile Flow Through a Bifurcation," (co-authors: C-N Yung, K. J. De Witt, A. A. Afjeh and S. Subramanian), International Journal of Numerical Methods for Heat and Fluid Flow Vol. 7, No. 8, December 1997, pp 843-862.
  57. "Icing Calculations on a Typical Commercial Jet Engine Inlet Nacelle," (co-authors: K. M. Al-Khalil and K. J. De Witt) AIAA Journal of Aircraft,Vol. 34, 1, January-February 1997, pp. 87-93.
  58. "A New Antiwear Additive/Surface Pretreatment for PFPE Liquid Lubricants," (co-authors: W. Morales, R.L. Fusaro, M. Siebert, R. Jansen and P. Herrera-Fierro) STLE Tribology Transactions, Vol. 40, 2, 1997 pp. 321-329.
  59. "The NASA Mars Pathfinder Mission," (co-author: M. W. Siebert) STLE Lubrication Engineering, Vol. 54, No 12, 1998 pp13-19.
  60. "Mars Pathfinder Wheel Abrasion Experiment-Ground and Flight," (co-authors: M. W. Siebert, D. C. Ferguson, D. M. Wilt, J. C. Kolecki and A. F. Hepp) STLE Lubrication Engineering, Vol. 54, No 12, 1998 pp 20-26.
  61. "Numerical Computations of Flow in Rotating Ducts," (co-authors: F. Papa, K. Vaidyanathan and K. J. De Witt), International Journal of Numerical Methods for Heat and Fluid Flow Vol. 10, No. 5, 2000, pp 541-556.
  62. "Non-Newtonian Effects on the Performance of Dynamically Loaded Elliptical Journal Bearings Using a Mass-Conserving Finite Element Cavitation Algorithm," (co-authors P. Wang and K. Vaidyanathan), STLE Tribology Transactions Vol. 44, No. 4, October 2001, pp 533-542.
  63. "Viscous Contribution to Minimum Static Pressure in a Rapidly Rotating Transfer Passage," (co-authors F. Papa, K. Vaidyanathan, K. J. DeWitt and K. C. Masiulaniec) Proc Instn Mech Engrs, Vol 215 Part D, pgs 1093-1098, 2001
  64. "Combined Surface Roughness Pattern and Non-Newtonian Effects on the Performance of Dynamically Loaded Journal Bearings," (co-authors P. Wang and K. Vaidyanathan), STLE Tribology Transactions Vol. 45, No. 1, January 2002, pp 1-10.
  65. "Application of the CE/SE Method to One-Dimensional Flow in Fluid Film Bearings," (co-author S. Cioc) STLE Tribology Transactions Vol. 45, No. 2, April 2002, pp 169-176.
  66. "Numerical Calculation of Developing Laminar Flow in Rotating Ducts with 180° Bend," (co-authors: F. Papa, K. Vaidyanathan and K. J. De Witt), International Journal of Numerical Methods for Heat and Fluid Flow Vol. 12, No. 7, 2002, pp 780-799.
  67. "A Deterministic Elastohydrodynamic Lubrication Model of High-Speed Transmission Components," (co-authors: C. Cioc, S. Cioc, L. Moraru and A. Kahraman) STLE Tribology Transactions Vol. 45, No. 4, October 2002, pp.556-562
  68. "Computation of Pressurized Gas Bearings Using CE/SE Method," (co-authors: S. Cioc, F. Dimofte, and D. P. Fleming) STLE Tribology Transactions Vol. 46, No. 1, January 2003, pp 128-133.
  69. "Numerical Simulation of Aerodynamic Damping for Flutter Analysis of Turbomachinery Blade Rows," (co-authors: R. Srivastava and M. A. Bakhle) AIAA Journal of Propulsion and Power, Vol. 19, No. 2, March-April 2003, pp. 260-267.
  70. " Application of the CE/SE Method to Two-Dimensional Flow in Fluid Film Bearings," (co-author S. Cioc) International Journal of Numerical Methods for Heat and Fluid Flow Vol. 13, No. 2, 2003, pp 216-243.
  71. " Application of the Conservation Element and Solution Element Method in Numerical Modeling of Heat Conduction with Melting and/or Freezing," (co-author A. Ayasoufi) International Journal of Numerical Methods for Heat and Fluid Flow Vol. 13, No. 4, 2003, pp 448-472.
  72. "Dynamic Modeling of a Dual Clearance Squeeze Film Damper – Part I: Test Rig and Dynamic Model with One Damper," (co-authors: L. Moraru, F. Dimofte, S. Cioc and D. P. Fleming) STLE Tribology Transactions Vol. 46, No. 2, April 2003, pp.  170-178.
  73. “Application of the CE/SE Method to Wave Journal Bearings,” (co-authors: S. Cioc, and F. Dimofte) STLE Tribology Transactions Vol. 46, No. 2, April 2003, pp. 179-186.
  74. "Dynamic Modeling of a Dual Clearance Squeeze Film Damper – Part I: Test Rig and Dynamic Model with One Damper," (co-authors: L. Moraru, F. Dimofte, S. Cioc and D. P. Fleming)-selected as the Editor’s Choice for the STLE Lubrication Engineering Vol. 59, No. 2, August 2003, pp.  16-24.
  75. "An Approximate Spectral Method for Accurate Solution of Fourier and Non-Fourier Heat Conduction Problems," (co-authors R.K. Rahmani and R. Cottam), the JSME International Journal, Series B, Vol. 46, No. 4,  November 2003, pp.  519 - 527.
  76. "Application of the Conservative Element and Solution Element Method in Numerical Modeling of Axisymmetric Heat Conduction with Melting and/or Freezing," (co-author A. Ayasoufi), the JSME International Journal, Series B, Vol. 47, No. 1,  March  2004, pp.  115 - 125.
  77. “Aeroelastic Analysis of Turbomachinery Part I: Phase Lagged Boundary Condition Methods,” (co-authors: R. Srivastava, M. A. Bakhle and G. L. Stefko) International Journal of Numerical Methods for Heat and Fluid Flow , Vol. 14, No. 3,  April  2004, pp.  366 - 381.
  78. “Aeroelastic Analysis of Turbomachinery Part II: Stability Computations,” (co-authors: R. Srivastava, M. A. Bakhle and D. Hoynaik) International Journal of Numerical Methods for Heat and Fluid Flow , Vol. 14, No. 3,  April  2004, pp.  382 - 402.
  79. “EHD Analysis of a Connecting Rod Bearing in a High-Speed Engine Part I: Rod and Bearing Deformation,” (co-authors D. Wang, Q. Yang and K. Vaidyanathan), STLE Tribology Transactions Vol. 47, No. 2, April 2004, pp. 280-289.
  80. “EHD Analysis of a Connecting Rod Bearing in a High-Speed Engine Part II: Lubrication Performance of Non-Circular Bearings,” (co-authors D. Wang, Q. Yang and K. Vaidyanathan), STLE Tribology Transactions Vol. 47, No. 2, April 2004, pp. 290-298.
  81. “Calculation of the Flow in High-Speed Gas Bearings Including Inertia Effects Using the CE/SE Method,” (co-authors: S. Cioc, F. Dimofte and D. Fleming) STLE Tribology Transactions Vol. 47, No. 3, July - September 2004, pp. 402-412.
  82. “Aspects Regarding the Use of Probabilistic Models for Isothermal Full Film Rough Line Contacts,” (co-authors: L. Moraru and A. Kahraman) STLE Tribology Transactions Vol. 47, No. 3, July - September 2004, pp. 386-395
  83. "Application of the Conservation Element and Solution Element Method in Numerical Modeling of Three-Dimensional Heat Conduction with Meltion and/or Freezing," Co-authors: A. Ayasoufi and R.K. Rahmani, ASME Journal of Heat Transfer, Vol 126, December 2004, pp. 937-945

  84. "Influence of Shock Wave on Turbomachinery Blade Row Flutter," (co-author: R. Srivastava) AIAA Journal of Propulsion and Power, Vol. 21, N0. 1 January-February 2005, pp. 167-174.

  85. “Three-Dimensional Numerical Simulation and Performance Study of an Industrial Helical Static Mixer”, (co-authors R.K. Rahmani and A. Ayasoufi), ASME, Journal of Fluids Engineering, Vol 127, May 2005, pp. 467 - 483
  86. “Numerical Simulation of Traveling Bubble Cavitation,” (co-authors: S. Mathew and E. Nikolaidis) International Journal of Numerical Methods for Heat and Fluid Flow, Vol. 16, No. 4,  2006, pp.  393 - 416
  87. “Numerical Simulation and Mixing Study of Pseudo-Plastic Fluids in an Industrial Helical Static Mixer”, (co-authors R.K. Rahmani and A. Ayasoufi), ASME, Journal of Fluids Engineering, Vol 128, (3) May 2006, pp. 467 - 480
  88. “A Numerical Study of the Heat Transfer Rate in a Helical Static Mixer” (co-authors R.K. Rahmani and A. Ayasoufi), ASME, Journal of Heat Transfer, Vol 128, (8) August 2006, pp. 769 – 783.
  89. “Dynamic Modeling of a Dual Clearance Squeeze Film Damper: Part II,” (co-authors: L. Moraru, F. Dimofte, S. Cioc and D. P. Fleming) STLE Tribology Transactions Vol. 49, No. 4, October-December 2006, pp.  611-620.
  90. “Lobatto Point Quadrature for Thermal Lubrication Problems Involving Compressible Lubricants. EHL Applications,” (co-author: L. Moraru) ASME Journal of Tribology, Vol. 129, January 2007, pp 194 – 198
  91. “A Numerical Study of the Global Performance of Two Static Mixers,” (co-authors R.K. Rahmani and A. Ayasoufi), ASME, Journal of Fluids Engineering, Vol 129, (3) March 2007, pp. 338 – 349
  92. “A Dynamic Analysis of Hydrodynamic Wave Bearings,” (co-authors: Ene, N.M., and Dimofte, F.) STLE Tribology Transactions Vol. 519, No. 1, January-February 2008, pp.  82-91.
  93. “A Stability Analysis for a Three-Wave Journal Bearing,” (co-authors: Ene, N.M., and Dimofte, F.) Tribology International Vol. 41, 2008, pp.  434 - 442.
  94. “Numerical Simulation of Turbulent Flow in an Industrial Helical Static Mixer,” (co-authors R.K. Rahmani and A. Ayasoufi), International Journal of Numerical Methods for Heat and Fluid Flow, Vol. 18, No. 6,  2008, pp.  675 - 696
  95. “Application of the Amplitude Reduction Technique within Probabilistic Rough EHL Models,” (co-author: L. Moraru) ASME Journal of Tribology, Vol. 131, April 2009, pp 1 – 8
  96. “Numerical Stefan Number-Insensitive Numerical Simulation of the Enthalpy Method for Stefan Problems Using the Space-Time CE/SE Method,” (co-authors A. Ayasoufi and R.K. Rahmani), Numerical Heat Transfer, Part B, Fundamentals, Vol 55, 2009, Issue 4, pp. 257-272

back

Last Updated: 4/8/24